- The quality of a reverse osmosis membrane is measured by its salt rejection, flow rate, chemical resistance and service life.
- Certifications (such as NSF/ANSI 58) guarantee that the membrane has been independently tested.
- At MEMBROM® we only work with top-performance membranes: genuine FILMTEC™ and MEMBROM® with FILMTEC™ sheet.
The membrane is the heart of any reverse osmosis system: it determines how pure the water is, how much water is produced, how much goes down the drain and how often it has to be replaced. That’s why choosing a quality membrane makes all the difference to the efficiency and durability of the whole system.
These are the key factors that distinguish a high-quality membrane from a standard one.
5 factors that determine the quality of a membrane
1. Salt rejection rate
This is the membrane’s ability to retain salts and other dissolved solids in the water. The higher the rejection percentage, the purer the water and the higher the quality of the membrane. You can check it yourself by measuring the inlet and outlet water, as we explain in how to check the purity of the water produced by a membrane.
2. Water flow
A quality membrane lets more water through per unit of surface area. This means higher output, less waste water and lower energy consumption. If you want to measure it on your system, see how to work out the amount of water produced and rejected.
3. Chemical resistance
The membrane is in constant contact with the water and with the products used to treat it. High-quality membranes resist chemical degradation better and therefore last longer.
4. Service life
This depends on the membrane itself, but also on the quality of the incoming water and on system maintenance. A quality membrane well protected by its pre-filters needs far fewer replacements. We go into detail in how long a reverse osmosis membrane lasts.
5. Certifications
Look for membranes with quality and safety certifications, such as NSF/ANSI 58, which guarantees that the membrane has been tested and meets the standards set for reverse osmosis systems.
FILMTEC™: the world benchmark in membranes
In the 1970s, FILMTEC™ became the first company to develop and patent reverse osmosis membranes with viable technical and economic performance. After almost 50 years of research, it is now recognised as the world’s leading manufacturer, with the most advanced and reliable membranes in the industry.
Because they are so well known, they are also among the most copied. If you buy one, we recommend reading how to tell a genuine FILMTEC™ membrane from a fake.
The membranes MEMBROM® distributes
At MEMBROM® we only sell top-performance membranes. That’s why we distribute only:
- MEMBROM® membranes, made with a FILMTEC™ sheet specially designed to last longer, produce more and purer water, and reject less water than standard membranes on the market.
- Genuine FILMTEC™ membranes from the latest models, with the most advanced technology, achieving up to 99% water purity.



