Reverse osmosis for the food industry

A continuous supply of purified water for beverages, bakeries and food processes, with bacteriological safety and minimal water use. MEMBROM® semi-industrial systems of up to 102 litres per hour, fully anti-bacterial.

385 L/dayof water saved in a real case
3 ppmproduct water from 42 ppm
102 L/hon the highest-flow model
AB100% anti-bacterial version
Manufacturer since 1994CE certifiedMembranes with FILMTEC™ sheet100% anti-bacterial versionDirect flow, no tankFree 24/48h shipping to mainland Spain

Why in industry

Consistent water quality for your product

Continuous supply

Designed to run 12 hours a day; with two systems in parallel, supply is never interrupted.

Food safety

Fully anti-bacterial AB version and a 0.2-micron absolute post-filter at the point of use.

Less water and waste

A 2:1 ratio compared with 1:6 for a conventional reverse osmosis system, and filters that last almost a year.

Process control

Flow meters with counters and a TDS/EC meter to record output and quality.

High flow

Semi-industrial reverse osmosis systems

Fully anti-bacterial 72 and 102 L/h models.

2:1 commercial reverse osmosis

42 L/h systems

With 20″ filters lasting up to 56,000 litres for higher consumption.

Microfiltration

Commercial microfiltration systems

Certified particle and bacteria retention at the point of use.

Real case

Beverage industry: before and after

A small beverage company needed 70 litres a day of very pure water with anti-bacterial control.

Previous systemMEMBROM® OI-NX-2:1-07-AB20
Product water70 L/day70 L/day
Waste water420 L/day (1:6)35 L/day (2:1)
TDS of product waterInsufficient, required deionisation3 ppm from 42 ppm
Filter changesAt least once a monthEvery 342 days
Bacterial control—AB system + 0.2 µm absolute post-filter

Read the full case in 2:1 anti-bacterial semi-industrial reverse osmosis.

Frequently asked questions

Questions about reverse osmosis in the food industry

What flow rates can the systems produce?

MEMBROM® semi-industrial systems produce a minimum of 30, 42, 72 or 102 litres per hour in direct flow. For higher flows we can install several systems in parallel.

How is bacteriological safety guaranteed?

With the AB version, which includes anti-bacterial filters, filter housings and membrane housings, and a 0.2-micron absolute filtration post-filter at the point of use.

Can I get very pure water without fully demineralising it?

Yes. In the beverage company case we achieved 3 ppm with reverse osmosis alone, without deionising resins, while keeping minimal mineralisation.

How much maintenance does it need?

With 36,000-litre filters and 105 litres of inlet water a day, the filters last almost a year.

Do you build custom systems?

Yes. We build systems tailored to your flow rate, space and quality requirements.

Need purified water for your production?

Tell us your consumption and the incoming water, and we’ll propose a system.