Reverse osmosis for hydroponics, growing and irrigation

Start with water free of salts and chlorine so you can add exactly the nutrients each plant needs. MEMBROM® systems with a conductivity (EC) meter for hydroponics, urban gardens, bonsai, orchids and carnivorous plants.

EC in µSoptional conductivity meter
90–99%of dissolved salts removed
30–102litres/hour in direct flow
2:1two litres purified for every litre rejected
Manufacturer since 1994CE certifiedMembranes with FILMTEC™ sheet100% anti-bacterial versionDirect flow, no tankFree 24/48h shipping to mainland Spain

Why for growing

Precise nutrition from clean water

EC control

With low-conductivity water, the final EC depends only on the nutrients you add.

No salt build-up

Prevents limescale and salts building up in the substrate, the roots and irrigation systems.

No chlorine

Activated carbon pre-filtration removes chlorine and chloramines, which can damage roots.

Sensitive plants

Ideal for bonsai, orchids and carnivorous plants, which are very sensitive to the minerals in tap water.

Small-scale growing

Low-waste systems

For urban gardens, indoor growing and plant collections.

Commercial growing

Commercial reverse osmosis with EC meter

Flow meters with counters and a conductivity meter to monitor every watering.

How to use it

Reverse osmosis water + nutrients = exact EC

Electrical conductivity (EC) is the key parameter in hydroponics. If the starting water already has a high EC because of limescale and salts, it’s impossible to adjust the nutrient solution precisely.

  • MEMBROM® systems remove 95–99% of dissolved solids in hard water.
  • The optional dual-probe meter shows the EC of the inlet water and the purified water.
  • 2:1 models keep waste water to a minimum, which is crucial in areas with water shortages.

If you’re not familiar with these units, see how to measure water purity in ppm and µS. And if you only need to remove chlorine, an adsorption dechlorinator may be enough.

Useful conversions

1 ppm
1 mg/l of dissolved solids
1 ppm
≈ 2 µS/cm (drinking water standard)
1 mS/cm
1,000 µS/cm

Frequently asked questions

Questions about reverse osmosis for hydroponics

Why use reverse osmosis water in hydroponics?

Because it lets you start from a very low EC and add only the nutrients the plant needs, without interference from the limescale and salts in tap water.

Which meter do I need, TDS or EC?

Growers usually work with conductivity (EC, in µS/cm). Our systems can be fitted with either a TDS or an EC meter.

What flow rate do I need?

It depends on the growing area. MEMBROM® systems produce 30 to 102 litres per hour in direct flow; we'll help you work it out.

Is it suitable for watering bonsai and orchids?

Yes, these plants are very sensitive to limescale and salts, and reverse osmosis water is ideal for them.

What flow rate does your growing operation need?

Tell us the area and the irrigation system, and we’ll recommend a system.