Commercial low-waste direct-flow reverse osmosis

MEMBROM® low-waste systems with optional flow meters, counters and TDS/EC meter, a stainless steel frame and fully anti-bacterial versions. From 30 to 102 litres per hour for hospitality, clinics, laboratories and industry.

30–102litres/hour minimum output
2:1two litres purified for every litre rejected
1200 GPDon the highest-flow model
3 yearswarranty, made in Spain
Designed and made in SpainCE certifiedEU registered industrial designStainless steel frame100% anti-bacterial versionFree 24/48h shipping to mainland Spain

1:1 models · 30 L/h

1:1 commercial reverse osmosis

One litre purified for every litre rejected. In a standard or fully anti-bacterial version, with 10″ or 20″ filters.

2:1 models · 42 L/h

2:1 commercial reverse osmosis

Two litres purified for every litre rejected, with a minimum output of 0.7 L/min.

High flow · 72 and 102 L/h

High-flow commercial reverse osmosis

Fully anti-bacterial 800 and 1200 GPD models for hospitality, clinics and industry.

In detail

Flow meters and counters in plain view

Cumulative litre counters
Cumulative litre counters
Real-time flow meters
Real-time flow meters

Comparison

Commercial reverse osmosis system comparison

All include a pump, solenoid valve, 3 pressure gauges, carbon flush system, stainless steel frame, 1 sediment filter, 2 carbon block filters and 2 or 4 membranes with FILMTEC™ sheet.

ModelMinimum outputFilter lifespanAnti-bacterialFiltersMembrane GPDProduct : waste
OI-PR-1:1-05-AR1030 L/h22.000 o 36.000 LNo10″1501 : 1
OI-PR-1:1-05-AR2030 L/h36.000 o 56.000 LNo20″1501 : 1
OI-PR-1:1-05-AB1030 L/h22.000 LYes10″1501 : 1
OI-PR-1:1-05-AB2030 L/h36.000 LYes20″1501 : 1
OI-PR-2:1-07-AR1042 L/h22.000 o 36.000 LNo10″4002 : 1
OI-PR-2:1-07-AR2042 L/h36.000 o 56.000 LNo20″4002 : 1
OI-PR-2:1-07-AB1042 L/h22.000 LYes10″4002 : 1
OI-PR-2:1-07-AB2042 L/h36.000 LYes20″4002 : 1
OI-PR-2:1-12-AB1072 L/h22.000 LYes10″8002 : 1
OI-PR-2:1-12-AB2072 L/h36.000 LYes20″8002 : 1
OI-PR-2:1-17-AB (1200 GPD)102 L/h22.000 L (10″) o 36.000 L (20″)Yes10″ o 20″12002 : 1

Minimum output at 3 bar. AB: anti-bacterial filters, filter housings and membrane housings, no disinfection needed.

Full control

Flow meters, counters and quality meter

Real-time flow

See how much water goes in, how much is purified and how much is rejected, in litres per minute. Makes calibration easier and confirms the 2:1 or 1:1 ratio.

Cumulative counters

They remember the litres even when the batteries run out. You'll know when to change filters (22,000, 36,000 or 56,000 L) and membranes.

TDS or EC meter

Measures unpurified and purified water on the same meter so you can compare them.

3 pressure gauges and valves

Pressure at 3 points and valves to flush carbon dust from new filters.

Real performance

90–99% removal of dissolved solids

In every case tested: 95–99% in hard water and 90–95% in soft water.

95–99%in hard water
90–95%in soft water
99.9%of chlorine throughout the life of the filters

See real customer results from Spain and Portugal on the low-waste reverse osmosis page.

MEMBROM® commercial reverse osmosis system with flow meters

AB version

Fully anti-bacterial, no disinfection

AB models feature anti-bacterial filters, filter housings and membrane housings with food-grade bacteriostatic silver. They need no disinfection and can extend filter life up to 8 years with no risk of bacteriological contamination.

That’s why they are the recommended choice for hospitality, hospitals, clinics, laboratories, veterinary practices and the food industry, where every risk must be kept to a minimum.

  • Stainless steel frame as standard.
  • 8-bar anti-bacterial filter housings.
  • Low-waste membranes with FILMTEC™ sheet.

Applications

Where is a commercial reverse osmosis system installed?

Wherever a high flow of purified water, monitoring and maximum bacteriological safety are needed.

Hotels and restaurantsHospitals and clinicsLaboratoriesVeterinary practicesFood industryOffices and institutionsProcess water

Frequently asked questions

Common questions about commercial reverse osmosis

What is the difference between commercial reverse osmosis and standard low-waste reverse osmosis?

They are the same low-waste direct-flow systems, but the OI-PR commercial range adds a stainless steel frame as standard, optional flow meters, counters and TDS/EC meter, fully anti-bacterial versions and 72 and 102 L/h models.

What does AB mean in the model name?

That the system is fully anti-bacterial: the filters, filter housings and membrane housings contain bacteriostatic silver. It needs no disinfection.

What are the flow meters with counters for?

They show the instantaneous flow of inlet, purified and waste water, and keep a running total of litres treated. They make commissioning easier and tell you when to change filters and membranes.

How much water does it produce?

Depending on the model, a minimum of 30, 42, 72 or 102 litres per hour at 3 bar.

Can I check the quality of the water produced?

Yes, with the optional TDS (ppm) or conductivity (µS) meter, which measures both inlet and purified water on the same device.

What warranty do they have?

3 years. These systems are designed and made in Spain, CE certified and with industrial designs registered in the EU.

Equipping a business or laboratory?

Tell us your daily consumption and use, and we’ll recommend the right commercial model. If you’re an installer, ask for our wholesale price list.