- Applications · Solutions by sector
Reverse osmosis applications by sector
Every use of water needs a different level of purity, flow rate and control. Find the right MEMBROM® reverse osmosis system, filters and membranes for your home, business, laboratory or industry.
Choose your sector
What do you need purified water for?
Select your application and we’ll show you the recommended system, the results you can expect and the most common questions.
Home
Purified water for drinking and cooking at home.
Hospitality
Coffee, ice, cooking and glassware without limescale.
Aquariums
Pure water for fish, plants and invertebrates.
Hydroponics and growing
Salt-free water for precise feeding.
Laboratory and medical
High-purity water with full control.
Food industry
Continuous flow and bacteriological safety.
How to choose
Three questions to get the right system
How many ppm does your water have?
The total dissolved solids (TDS) in the inlet water determine the result. Our systems remove 95–99% in hard water and 90–95% in soft water.
How much water do you need?
From 30 to 102 litres per hour in direct flow, with no tank. For household use, a 10″ 1:1 or 2:1 system is enough.
What level of safety do you need?
For hospitality, healthcare and the food industry we recommend the fully anti-bacterial AB versions.
What it removes
What reverse osmosis removes from water
The membrane removes 90–99% of dissolved solids, while the pre-filtration removes chlorine and volatile compounds.
Frequently asked questions
Frequently asked questions about reverse osmosis applications
Which reverse osmosis system do I need?
It depends on the use, daily consumption and the incoming water. For the home, a 1:1 or 2:1 low-waste system is usually enough; for hospitality, laboratories or industry we recommend the commercial range with flow meters and the anti-bacterial version.
Do MEMBROM® systems need a tank?
No. They are direct-flow systems: they purify on demand and deliver the water to the tap or process with no storage tank.
How much water do they waste?
Very little: the 2:1 models purify 2 litres for every litre rejected, and the 1:1 models one for one. A conventional reverse osmosis system can waste 4 or more litres for every litre purified.
Can I get demineralised water with a TDS of 0?
Yes, by adding a deioniser filter after the reverse osmosis system. As reverse osmosis already removes most dissolved solids, the deioniser lasts much longer.
Can't find your application?
Tell us what you need the water for and we’ll recommend the right solution.