MEMBROM® low-waste direct-flow reverse osmosis

Systems that purify 1 in every 2 litres (1:1) or 2 in every 3 (2:1), straight to the tap with no storage tank. Membranes with FILMTEC™ sheet, filters lasting 22,000 to 56,000 litres and a 3-year warranty.

2:1two litres purified for every litre rejected
42 L/hguaranteed minimum output (2:1)
95–99%of dissolved solids removed in hard water
3 yearswarranty, made in Spain
Designed and made in SpainCE certifiedEU registered industrial designInnovations in MEMBROM® patentsAnti-bacterial membrane housings as standardFree 24/48h shipping to mainland Spain

Direct flow, no tank

Low-waste reverse osmosis systems

1:1 (30 L/h) and 2:1 (42 L/h) models with 10″ or 20″ filters, steel frame (stainless optional), installation kit and stainless steel tap.

In detail

Inside a MEMBROM® system

Purified water on demand
Purified water on demand
Long-life filters
Long-life filters

Comparison

Low-waste system comparison

All include a pump, solenoid valve, 3 pressure gauges, 1 sediment filter, 2 carbon block filters and 2 membranes with FILMTEC™ sheet.

ModelMinimum output at 3 barFilter lifespanFiltersMembranesProduct : waste
OI-1:1-05-AR100.5 L/min · 30 L/h22.000 o 36.000 L10″150 GPD1 : 1
OI-1:1-05-AR200.5 L/min · 30 L/h36.000 o 56.000 L20″150 GPD1 : 1
OI-2:1-07-AR100.7 L/min · 42 L/h22.000 o 36.000 L10″400 GPD2 : 1
OI-2:1-07-AR200.7 L/min · 42 L/h36.000 o 56.000 L20″400 GPD2 : 1

Average and maximum output: 1:1-05 → 33 L/h average and 39 L/h maximum · 2:1-07 → 45 L/h average and 51 L/h maximum.

Real results

Purity achieved by our customers

Guaranteed performance

90–99% removal of dissolved solids

The 2:1 and 1:1 models purify to the same percentage, despite being designed to waste very little water.

95–99%in hard water
90–95%in soft water
99.9%of chlorine throughout the life of the filters

Real cases

Real results in Spain and Portugal

Inlet water and purified water measured by users of MEMBROM® systems.

AreaWater typeInlet (ppm)Purified (ppm)
BarcelonaHard, softened (desalination plant)1.41020
TenerifeHard (desalination plant)78020
AlicanteHard, not softened72020
SevilleHard, softened51014
CórdobaHard, not softened50511
BarcelonaHard, softened3405
BarcelonaHard, not softened32512
PontevedraSoft, highly mineralised31212
GranadaHard, not softened3054
Las PalmasHard (desalination plant)2808
Ciudad RealHard, not softened2305
SevilleModerately hard, not softened11311
PontevedraSoft, highly mineralised1068
PontevedraSoft423
Trás-os-Montes (Portugal)Soft352
PontevedraSoft271

For guidance only: results depend on the water type, the nature of the dissolved solids, pressure, temperature and pH.

What it removes

What does a MEMBROM® reverse osmosis system remove?

The water produced has no taste, odour or colour. The membrane removes 90–99% of dissolved solids, and the carbon filters remove chlorine and volatile compounds.

Limescale (calcium carbonate)NitratesPesticidesLeadSulphatesFluoridesArsenicChloridesIronMercury and heavy metalsChlorine and chloraminesTrihalomethanesVOCs and PFASTaste, odour and colour

MEMBROM® design

Food safety, monitoring and robust components

Direct flow: water is purified in seconds with no storage tank, so bacteriological contamination is virtually impossible. Even so, every system comes with anti-bacterial membrane housings as standard and can be used in hospitality, hospitals, laboratories, veterinary practices or the food industry.

Monitoring: 3 gauges show the pressure at 3 points, a valve system makes it easy to flush carbon dust, take samples and depressurise, and all connections are quick-connect.

Reinforced components: they run continuously with up to 7 bar of inlet pressure, with no need for a pressure-reducing valve.

Every system includes

  • Pump, solenoid valve and 3 pressure gauges.
  • 1 semi-absolute 82–99% sediment filter.
  • 2 carbon block filters of 22,000, 36,000 or 56,000 L.
  • 2 membranes with FILMTEC™ sheet.
  • Water inlet, drain connection and 5 m of tubing.
  • Stainless steel tap.

Optional: TDS or EC meter and stainless steel frame.

Frequently asked questions

Common questions about low-waste reverse osmosis

What does 2:1 or 1:1 low waste mean?

It is the ratio of purified water to rejected water. A 2:1 system produces 2 litres of purified water for every litre that goes down the drain; a 1:1 system, one litre for every litre rejected. A conventional reverse osmosis system usually rejects several litres for every litre purified.

What is a direct-flow reverse osmosis system?

A reverse osmosis system that purifies water on demand and delivers it straight to the tap, with no storage tank. The water isn't stored, which improves bacteriological safety.

How much water does it produce?

We guarantee a minimum of 30 L/h for the 1:1 models and 42 L/h for the 2:1 models, at 3 bar. On average they deliver 33 and 45 L/h respectively.

What does it remove?

The membrane removes 90–99% of dissolved solids: limescale, nitrates, pesticides, lead, sulphates, fluorides, arsenic, iron and other heavy metals. The carbon filters remove chlorine, chloramines, trihalomethanes, VOCs and PFAS.

Does it need a pressure-reducing valve?

No. The components are reinforced to run continuously with up to 7 bar of inlet pressure.

How is it different from commercial reverse osmosis?

The OI-PR commercial range adds optional flow meters with counters, a stainless steel frame as standard, fully anti-bacterial versions and higher-flow models (72 and 102 L/h).

Which system does your water need?

Tell us your water’s ppm and your daily consumption, and we’ll recommend the right model and filters.