- Replacement parts · Activated carbon filters
MEMBROM® activated carbon block filters
Coconut-shell activated carbon in block form that removes 99% of chlorine, bad taste, odour and colour, with real lifespans of 22,000 to 56,000 litres. Anti-bacterial version for non-chlorinated water.
10″ format
10-inch activated carbon filters
For home reverse osmosis and under-sink filtration.
20″ format
20-inch activated carbon filters
For semi-industrial systems, dechlorinators and point-of-entry filtration.
Comparison
Activated carbon filter comparison
Choose by housing size and how many litres you want it to last.
| Filter | Size | Real lifespan | Anti-bacterial | Recommended for |
|---|---|---|---|---|
| 10″ carbon block · 22,000 L | 10″ | 22.000 L | No | Home reverse osmosis |
| 10″ carbon block · 36,000 L | 10″ | 36.000 L | No | More years between filter changes |
| 10″ carbon block · 22,000 L anti-bacterial | 10″ | 22.000 L | Yes | Non-chlorinated water and public use |
| 20″ carbon block · 36,000 L | 20″ | 36.000 L | No | Semi-industrial reverse osmosis and dechlorinators |
| 20″ carbon block · 56,000 L | 20″ | 56.000 L | No | Maximum lifespan |
| 20″ carbon block · 36,000 L anti-bacterial | 20″ | 36.000 L | Yes | Public and medical installations |
Lifespan calculated until the filter loses 15% of its capacity: with less demanding use, a 22,000-litre filter can last much longer.
What it removes
What a good activated carbon filter does
Chlorine
A real 99% removal rate, tested with 2 ppm of chlorine (twice the usual level in Spain).
Taste, odour and colour
An outstanding reduction in the compounds that give water a bad taste and smell.
Organic compounds
Significant reduction of volatile organic compounds, pesticides and other chemicals.
Protects the membrane
Reverse osmosis membranes are damaged by chlorine: the carbon ensures it never reaches them.
Real litres, not theoretical ones
We consider a filter exhausted when its capacity drops by 15%. With a 5-micron sediment filter in front, the carbon lasts much longer.

Anti-bacterial filters
What an anti-bacterial filter does (and doesn't do)
We call them anti-bacterial because it is easier to understand, but technically they have a bacteriostatic effect: they contain silver nanoparticles that stop bacteria from growing on the surface and inside the filter over time or after accidental contamination.
They do not kill bacteria already present in the water. That is why they are recommended for non-chlorinated water, installations at risk of bacterial contamination and public drinking-water or medical applications.
- Food-grade silver nanoparticles.
- They add nothing to the water.
- The same chlorine, taste and odour removal as the standard version.
Reverse osmosis pre-filtration
Maximum effectiveness as a membrane pre-filter
All reverse osmosis membranes are very sensitive to chlorine and deteriorate quickly when exposed to it. MEMBROM® activated carbon filters ensure it is removed completely, which is why they substantially extend the life of any membrane.
Although they have a nominal filtration of 5 to 10 microns depending on the model, we recommend installing them after a sediment filter of at least 5 microns: that way they do not clog up with particles and last much longer.
- Block format for higher efficiency than granular carbon.
- Factory pre-washed: releases very few particles at start-up, and a 15-minute flush is enough.
- They meet and exceed European and US standards for materials in contact with drinking water.
Technical data
- Carbon
- Coconut-shell block
- Chlorine
- 99% real removal
- Lifespan
- 22.000 · 36.000 · 56.000 L
- Sizes
- Standard 10″ and 20″
- Filtration
- 5 to 10 microns nominal
- Flushing
- 15 minutes
Applications
What are they used for?
From home reverse osmosis to industrial dechlorination, and for soft water that does not need reverse osmosis.
Frequently asked questions
Common questions about activated carbon filters
How long does a MEMBROM® activated carbon filter last?
Between 22,000 and 56,000 litres depending on the model. This is a real, strict lifespan: we consider the filter exhausted when it loses 15% of its capacity, so with undemanding use it can last considerably longer.
Do I need a sediment filter before the carbon?
Yes, we recommend it. A sediment filter of at least 5 microns stops particles from clogging the carbon's pores, so it lasts much longer.
Do they release carbon dust when installed?
Very little. They come pre-washed and disinfected from the factory, and letting the water run for about 15 minutes is enough to flush out the first particles.
Does the anti-bacterial filter remove bacteria from the water?
No. It stops bacteria from growing in the filter, but it does not remove those already in the water. That requires another treatment, such as 0.2-micron sterile filtration.
Why don't you sell carbon post-filters?
Because with MEMBROM® carbon block pre-filtration, chlorine, taste, odour and colour are already removed before the membrane, so no additional post-filter is needed.
Do they fit any system?
Yes, as long as it uses standard 10″ or 20″ cartridges. They are compatible with most reverse osmosis and filtration systems.
Complete your system
Everything your water system needs
Sediment filters
They trap particles and protect the carbon filters and membranes.
Filter + membrane packs
A complete replacement set in a single order.
Filter housings
Shatterproof and anti-bacterial 10″ and 20″ housings.
Adsorption dechlorinators
3-stage systems for chlorine removal.
Reverse osmosis membranes
FILMTEC™ and MEMBROM® from 50 to 600 GPD.
Not sure which filter your system takes?
Tell us the model of your reverse osmosis system or filter and we’ll tell you the exact replacement.





