Long life

Official manufacturerMEMBROM® · 32 years in manufacturing

20″ activated carbon block filter · 36,000 litres

MEMBROM® CTO activated carbon block dechlorinator: removes chlorine, taste, odour and colour for 36,000 litres.

20″36.000 LCarbon block99.99% chlorineUniversal

€27.55

21% VAT and shipping included · Ships in 24/48h

Free 24/48h shippingSame-day dispatch (mainland Spain)
3-year warrantyCE certified · EU design
Secure paymentCard · invoice issued
Made in SpainOwn patent · R&D
36,000 Lcertified lifespan
99.99%chlorine removed at start
3 yearsmaximum use
Universal20″ size
MEMBROM® CTO activated carbon block filter in standard 20″ size with a certified 36,000-litre lifespan. It removes 99.99% of chlorine at the start and stays effective throughout its service life, protecting reverse osmosis membranes.
Ultra-long life

36,000 litres certified using 2 filters (25,000 L with just one), far beyond a conventional filter.

Removes chlorine, taste and odour

Laboratory tested with 2 ppm of chlorine: 99.99% at the start and high retention to the end of its service life.

CTO carbon block

Much greater adsorption capacity than granular carbon, with no channelling.

Protects the membrane

Retains the chlorine that would damage the polyamide sheet of the reverse osmosis membrane.

Universal size

Standard 20″ format that fits most filter housings on the market.

Made by MEMBROM®

Replacement part with in-house quality control and shipping in 24/48h.

Technical specifications

SizeStandard 20″ · Ø 63 mm
Length500 mm
Lifespan36,000 L (with 2 filters)
With a single filter25.000 L
Chlorine removal99.99% at start · 85% at end
Nominal filtration5 µm
Maximum flow rate16 L/min (8 recommended)
Temperature5–55 ºC
Maximum pressure10 kg/cm² (5 recommended)
Recommended replacement36,000 L or 3 years

When to change it

As a reverse osmosis pre-filter on drinkable (chlorinated) mains water: with a single filter, after 25,000 litres; with two filters, after 36,000 litres or 3 years, whichever comes first.

Applications

Pre-filtration for reverse osmosis systems and filtration of mains water for home and commercial use.

Home
Hospitality
Food industry
Laboratory
Medical / pharma
Aquariums
Hydroponics

Certificates, quality and warranty

Raw materials certified for contact with drinking water and for the food and medical industries, complying with European and US standards.

CENSFFDAUNE 149101GMPOwn patent

MEMBROM® replacement part made to European standards, with adsorption capacity verified in the laboratory.

Frequently asked questions

Will it fit my system?+
Yes. It is a standard 20″ size and fits most filter housings in reverse osmosis and filtration systems.
When should it be changed?+
When it reaches 36,000 litres or 3 years, whichever comes first, on drinkable mains water.
Does it need a sediment pre-filter?+
Yes, for greater effectiveness and a longer life we recommend installing a 5-micron sediment filter before it.
How do I flush it when installing?+
Let the water run to drain for a few minutes to flush out loose carbon before connecting it to the membrane.