MEMBROM® reverse osmosis membrane housings

Housings for 1812 and 2012 membranes in reinforced polypropylene, with a double seal, safety closure and anti-bacterial bacteriostatic silver. They operate at pressures of up to 8 bar and take membranes from 35 to 150 GPD.

8 baroperating pressure
35–150GPD compatible membranes
1/8″ NPTFstandard connections
2.5″standard diameter for brackets
Reinforced polypropyleneDouble seal and safety closureAnti-bacterial with silverNSF · FDA · UNEFits 1812 and 2012Free 24/48h shipping to mainland Spain

Membrane housings

1812 anti-bacterial membrane housing

A robust housing with a double safety seal and precision closure.

Compatible membranes

Membranes for your membrane housing

MEMBROM® and FILMTEC™ membranes in 1812 format.

Technical data

Membrane housing specifications

FeatureValue
Compatible membranes1812 y 2012
Membrane output35, 50, 70, 75, 80, 100, 125 and 150 GPD
Operating pressureUp to 8 bar
ConnectionsStandard 1/8″ NPTF
DiameterStandard, fits 2.5″ brackets
MaterialReinforced polypropylene with bacteriostatic silver
ClosureDouble seal and safety closure
StandardsNSF, FDA and UNE standards

Why MEMBROM®

The safest membrane housing for your reverse osmosis system

No drips or leaks

Reinforced polypropylene, a double seal and a safety closure to prevent drips and flooding.

Fully anti-bacterial

The bacteriostatic silver runs through the whole material: it protects inside and out without adding anything to the water.

Direct replacement

Standard dimensions and connections: replace your old membrane housing without changing the bracket.

Demanding use

Exceeds NSF, FDA and UNE standards for domestic, industrial, food, pharmaceutical and medical use.

Applications

Where is it used?

As a replacement for your old membrane housing or as a component in a new system. It comes as standard on our low-waste and commercial reverse osmosis systems.

Home reverse osmosisAquariumsGrowing and hydroponicsCompact systems5-stage systemsSemi-industrial reverse osmosis

Frequently asked questions

Common questions about membrane housings

Will it fit my membrane?

Yes, if it's a 1812 or 2012 size rated from 35 to 150 GPD (35, 50, 70, 75, 80, 100, 125 or 150 GPD), the most common formats in home systems.

Can I replace my old membrane housing?

Yes. It has standard 1/8″ NPTF connections and a standard diameter for 2.5″ brackets, so it's easy to swap.

What does the anti-bacterial version add?

Food-grade bacteriostatic silver built into the material stops bacteria from appearing inside and outside the membrane housing, without adding anything to the water.

What pressure can it handle?

It is designed to operate normally at pressures of up to 8 bar.

Do MEMBROM® systems use it?

Yes, it comes as standard on our low-waste reverse osmosis systems and on the commercial range.

Questions about compatibility?

Send us a photo of your membrane housing or the model of your system and we’ll confirm whether it’s compatible.