MEMBROM® high-performance 2:1 low-waste reverse osmosis

In short
  • A 2:1 reverse osmosis system purifies 2 litres for every litre it rejects: it makes use of two-thirds of the water.
  • MEMBROM® guarantees a real 2:1 ratio, a minimum of 42 L/h, 90–99% removal of dissolved solids, filters lasting 22,000 to 56,000 litres and resistance to 7–8 bar.
  • Real customer results: up to 98.6% purification in very hard water.

When a reverse osmosis (RO) system works at a 2:1 ratio, it means that of every 3 litres that go in, 2 are purified and only 1 is discarded as waste water. It’s the approach of high-performance systems: conserving water and getting the most out of the process.

5 keys to high-performance 2:1 reverse osmosis

From MEMBROM®’s point of view, a 2:1 system must meet these conditions to be considered “high-performance”:

1. Real water recovery, not approximate

A 2:1 ratio indicates good efficiency: more of the incoming water is put to use, which is crucial where water is scarce or expensive. In MEMBROM® systems, two-thirds recovery is real and guaranteed: the user or installer sets the system to 2:1 at first start-up.

2. Guaranteed purity

For the most demanding applications it isn’t enough to say the water is good quality: the manufacturer must guarantee a purification percentage. MEMBROM® systems guarantee the removal of 90 to 99% of conductivity and dissolved solids, with an average of 95%.

3. Minimal maintenance

A reverse osmosis system needs filter changes and membrane care. MEMBROM® systems use exceptionally long-life filters that avoid downtime and protect the membranes, extending their service life. We guarantee a lifespan of 22,000, 36,000 or 56,000 litres for the sediment and carbon block pre-filters.

4. Guaranteed minimum output

To choose the right system you need to know how much water it will produce as a minimum. MEMBROM® guarantees a minimum output of 0.7 litres per minute (42 litres per hour) on its 2:1 systems.

5. Pressure resistance

Many small systems need a pressure-reducing valve if the inlet pressure exceeds 3 bar, to prevent drips. MEMBROM® systems don’t: their robust components guarantee operation with 7 bar at the inlet and up to 8 bar continuous at the membrane.

Guaranteed specifications of MEMBROM® 2:1 systems

SpecificationGuaranteed value
Water recoveryReal, measurable 2:1 (two-thirds of the inlet water)
Minimum output0.7 L/min (42 L/h)
Removal of dissolved solids (TDS) or conductivity (EC)90-99%
Filter lifespan22,000, 36,000 or 56,000 litres
Maximum pressure7 bar at the inlet · 8 bar continuous at the membrane
Warranty3 years · CE certified · made in Spain

Real purification results

The video shows a MEMBROM® 2:1 system running with an output always equal to or above 0.7 L/min, continuously, with 6 bar of inlet pressure and 7 bar at the membrane. With very hard water from the province of Barcelona, the water goes in at 1,100 µS (550 ppm) and comes out at 28 µS (14 ppm): 97.4% purification.

Hard and very hard water

AreaInlet waterProduct waterPurification
Barcelona1,410 ppm (2,820 µS)19–20 ppm (40 µS)98.6% (record)
Granada304.5 ppm (609 µS)4 ppm (8 µS)98.6% (record)
Córdoba505 ppm (1,010 µS)11 ppm (22 µS)97,8%
Ciudad Real230 ppm (460 µS)5 ppm (10 µS)97,8%
Barcelona (video)550 ppm (1,100 µS)14 ppm (28 µS)97,4%
Alicante720 ppm (1,440 µS)20 ppm (40 µS)97,2%
Las Palmas (Fuerteventura)280 ppm (560 µS)8 ppm (16 µS)97,1%
Barcelona325 ppm (650 µS)12 ppm (24 µS)96,3%
Seville515 ppm (1,030 µS)23 ppm (46 µS)95,5%

Soft and very soft water

AreaInlet waterProduct waterPurification
Pontevedra312 ppm (624 µS)12 ppm (24 µS)96,1%
Pontevedra27 ppm (54 µS)1 ppm (2 µS)96,3%
Northern Portugal35 ppm (70 µS)2 ppm (4 µS)94,3%
Pontevedra42 ppm (84 µS)3 ppm (6 µS)92,8%
Pontevedra106 ppm (212 µS)8 ppm (16 µS)92,4%
Pontevedra75 ppm (150 µS)6 ppm (12 µS)92%

As you can see, the more dissolved solids the inlet water contains, the higher the purification percentage: results are better in hard water than in soft water.

We can’t guarantee that you’ll get exactly these results, because they depend on the water’s composition, temperature, pH and pressure. We do guarantee that they will be within the specified purification range of 90–99%.

Why choose a MEMBROM® 2:1 reverse osmosis system

MEMBROM® low-waste reverse osmosis systems come with a 3-year warranty and CE certification. They are simple, easy to use, effective and robust, and because they are made in Spain, the supply of consumables, spare parts and technical service is assured. Meeting the guaranteed specifications means having a reliable tool: less maintenance, less wasted water and guaranteed purity.

2:1 reverse osmosis models

ModelFeatures
OI-2:1-07-AC(NX)-AR10The model in the video, with 36,000-litre filters.
OI-2:1-07-NX-AB10Fully anti-bacterial, with 22,000-litre anti-bacterial filters.
OI-2:1-07-AC(NX)-AR2020″ filters lasting 56,000 litres. Record purification in Granada.

See the full range of low-waste reverse osmosis or the anti-bacterial and commercial commercial reverse osmosis systems. If you want to understand why a membrane rejects water, read how to work out the amount of water produced and rejected.

Which 2:1 system do you need?Tell us your water’s ppm and your daily consumption.
Ask for advice
Picture of Jesús Manuel Taboada Cancelo

Jesús Manuel Taboada Cancelo

Reverse osmosis specialist at MEMBROM®. More than 30 years designing and manufacturing water purification systems in Spain.

Choose the best replacement parts for your reverse osmosis system

Exceptionally long-life membranes and filters, 100% compatible. Free 24/48h shipping to mainland Spain.